Mount your iPhone on the antenna, sweep, and watch Signal Bullseye pin each RSSI reading to the exact direction it was taken. You'll always know where peak signal is and how to get back to it.
No compass, no GPS, no IMU required. Just your phone's camera and an SSH connection to the radio.
Attach your iPhone to the antenna mast. Open Signal Bullseye and connect to the radio's CLI via the built-in SSH terminal.
Enable auto-shoot and sweep the antenna. The app tracks pointing direction using camera optical flow, no orientation sensors involved.
Each RSSI reading appears as a colored dot on the live camera view, pinned to the direction it was taken.
The map makes peak signal obvious. Steer back to that direction and lock the antenna down.
The camera doesn't need to be precisely aimed at the far-end radio. Roughly pointed is fine. More important is a stable background: keep long grass or leaves that wave in the wind out of frame, since that movement looks the same as the antenna turning and will throw off tracking.
Built for microwave backhaul, mmWave, and WISP point-to-point link alignment.
Uses Apple's Vision framework to measure how much the camera moved between frames. No orientation sensors involved. The camera is the position reference.
RSSI readings appear as color-coded dots on the live camera view, each one anchored to the antenna direction where it was captured.
Full-featured SSH terminal emulator with host management, SSH key support (including Secure Enclave), and regex-based RSSI extraction from any radio CLI output stream.
Captures readings automatically as you sweep. The volume buttons work as a manual trigger when you want more control. Saved snippets let you kick off a radio polling script with one tap.
Track Local V, Local H, Remote V, and Remote H at the same time. Switch between planes to work on cross-pol isolation and peak direction together.
SSH private keys can be stored in the iOS Secure Enclave, where they're hardware-protected and never extractable as plaintext. RSA, Ed25519, and ECDSA are all supported.
Anyone who installs, aligns, or troubleshoots directional wireless links.
Point-to-point and point-to-multipoint CPE alignment
Microwave and mmWave licensed link commissioning
Sector and PTP alignment during new site builds
Signal pattern analysis and interference troubleshooting
Signal Bullseye is coming soon to the App Store.
